Positioning and Elevation
Create a gradual rise beneath or behind another cushion, pad or upholstered component.
Order foam cut to your wedge dimensions. Enter the width, depth and height, then select your preferred foam type. Wedge foam is supplied as a matching pair cut to the selected dimensions. A quantity of 1 represents one pair.
Measurement guide: Measure every dimension in inches. W is the side-to-side width, D is the front-to-back depth, and H is the vertical height at the tall edge. Use the diagram to identify each required measurement.
One Wedge-Foam Application
This upholstered pet ramp shows how wedge foam can create a smooth, gradual incline. The same sloped profile can also be used for positioning cushions, back supports, displays, protective packaging and other custom projects.

Designed for Graduated Elevation
Custom wedge foam forms a right-triangular profile with one vertical edge, one flat base and one sloped face for positioning, elevation, back support and specialty projects.
Create a gradual rise beneath or behind another cushion, pad or upholstered component.
Use the continuous slope for reclining support, alignment or other fitted comfort applications.
Build lightweight angled forms for presentation, product support and custom fabrication.
Use a suitable foam type for angled spacers, protective supports and specialty packaging.
Visual Material Guide
Open a category to compare foam materials for comfort, support, durability and the cushion’s intended use.
Product color and texture may vary. Select foam by its performance and intended use rather than appearance alone.
Simple Angled Geometry
A wedge provides a predictable, continuous slope from the selected full height down to the thin edge across the specified depth.
Continuous Slope
The selected height and depth determine the angle from the vertical end to the opposite thin edge.
Matching Pair
Each ordered quantity is supplied as a matching pair made to the same selected dimensions.
Material Choice
Select the foam type, firmness and thickness for the user, support surface, environment and frequency of use.
Measure Before Ordering
Confirm the base width, front-to-back depth and vertical height at the tall edge before selecting the foam material.
Measure across the wedge from one side face to the other.
Measure along the flat base from the tall vertical edge to the opposite thin edge.
Measure vertically at the tall edge, perpendicular to the flat base.
Identify where the tall edge and thin edge must sit in the finished application.
Check width, depth and height against the diagram and remember that one ordered quantity represents one matching pair.
There are no questions yet. Be the first to ask a question about this product.
Chat with us in real-time for quick answers to your questions.
John P. Mure
Joshua F.
Courtney Capozzi